NOVATOP SWP 3-ply panel
NOVATOP SWP 3-ply panels are manufactured from 8% seasoned softwood (larch 12%). Each layer consists of solid wood lamellas. The 3-ply panel consists of a central layer rotated 90° to the outer layers. The thickness of the layers is variable and defines the final thickness of the panel. The lamellas of the middle layer are glued longitudinally. They are fixed vertically by butt joints or can be left continuous. Their maximum thickness is 42 mm. The outer layers are made of continuous lamellas 6 or 9 mm thick and 93 to 143 mm wide. The width of the surface lamellae is always the same, and the lamellae are oriented towards the surface from the right-hand side. The longitudinal joints of the lamellas are glued to each layer. The glue used is water-resistant and the bonding of the surface lamellas complies with EN 204, AW 100 or D4. Sanding quality corresponds to 100 grit (coarser sanding on request).
See moreNovatop
Similar products
* Bakelized Film Faced Plywood Panel 2500x1250mm
Wooden panels
Radiata-Pine
Wooden panels
Decorative panels Cream grey rustic oak 4082
Wooden panels